Today’s article is by guest writer Aaron Hockley
You’ve just returned from a family trip to the zoo, or maybe you just got back after a night exploring the city. Perhaps you’re on vacation and you’re back at your hotel room downloading photos after playing tourist for the day.
Before you wrap things up… STOP!
Many photographers (if not all) have been burned at some point by grabbing their camera and not realizing that something wasn’t quite ready to go. It’s a better habit to form to put the camera back on the shelf, or in the bag, ready to be used the next time, than to hope you remember to check everything at that point
Before You Put Away Your Camera, Check These Settings
- MODE DIAL
- Do you normally shoot in (P) for Program Mode? Or (A) for Aperture Priority? Whatever your preferred camera mode, rotate that dial and get it back to your usual setting.
- ISO
- This can bite you if you’re not careful. Make sure to reset your ISO back down to a low setting (like 100 or 200 ISO). While modern cameras are great at high ISOs up to 1600, 3200, or more if you need great low-light performance, for ordinary shooting situations that high setting might result in unwanted digital noise. I try to keep mine at 100 or 200 for general use.
- WHITE BALANCE
- If you leave things on Auto White Balance, you’re set. If you’ve changed to a custom white balance for a particular scene, be sure to change back to Auto when you’re done (if that’s your go to setting).
- DRIVE – Single vs. Continuous Shooting
- Are you a one-shot photographer? Or do you like to blast away in rapid-fire mode?
- IMAGE SIZE AND QUALITY
- RAW vs JPG? Big files vs Small files? Make sure that if you’ve changed your file size that you change it back to your preferred configuration (generally it’s advisable to shoot on the largest size, highest quality most of the time – you can always downsize later but making it bigger is tricky).
- EXPOSURE COMPENSATION
- Reset this to zero (0) so that you don’t start your next photography adventure with your images all coming out either under or overexposed.
- AUTOFOCUS
- Is it turned on or off? What should it be set to?
- METERING MODE
- You probably use evaluative metering most often, but if you’ve switched to spot metering, be sure to change that back.
- AUTO EXPOSURE BRACKETING (AEB)
- this is a great feature when you’re creating HDR photos or otherwise want to bracket your shots, but if you leave it on you’ll end up scratching your head as you review your next set of photos. If you start shooting with AEB turned on by accident, you’ll start making photos and wondering why some images look good, some are overexposed, and some are underexposed. Better to turn off this feature when you’re done shooting. (and if you have “weird” stuff going on just check it anyway)
What are the “right” settings to use?
Many of these settings are personal preferences; there’s not a “right” configuration but it’s important that you’re consistent so that when you grab your camera and start making photos that you get the results you’re expecting!
About Aaron Hockley
Aaron Hockley has been a Vancouver, Washington photographer for around twelve years; folks have been paying him for his photo services for the past four. Professionally he works most often with small businesses, creating images to help tell the stories of the people, places, products, and events that drive local commerce. Aaron can often be found writing and speaking about topics for the modern photographer (check out his writings at Splat Photo). Most recently he’s spoken about social media for photographers at SmugMug meetup groups in California, Utah, and Oregon. He’s also been interviewed twice for This Week in Photo. It’s entirely possible that he’s also made several of the mistakes referenced in the article above and that he learns by experience 😉
Find Aaron online:
- Website Hockley Photo
- Twitter @ahockley
- Google Plus
- Photography articles on Splat Photo
It is a bit like being an airline pilot checking. All of the instruments need to. Be checked before successful take off. Shooting at night with a high ISO is the gaff that I must frequently make. I was recently perplexed when my Nikon D90 started to shoot low res JPEG instead of RAW, now on this occasion it wasn’t me, rather a faulty printed circuit board that Nikon replaced!
I now check every the camera settings, having learnt from my mistakes. Thanks for the 1-9 checklist
Timer! This is the one that kills me every time. My timer. I’ll have it on for a family shot or self portrait or long exposure when I don’t want to touch the camera Then pick up the camera the next time and compose and click and nothing happens. Click again. What the heck!?!?!? It took my step-son to remind me to check my timer. Oh … right. DUH!!!!
Thanks for the list! I was recently “the photographer” at a one time family event and when the whole family got together for “the family portrait”, I was getting blown out exposures every time (finally switched to Manual). Got home and found that my camera was still on Spot Metering mode from our last hiking trip, wish I had had the list then.
Hi all,
Re my post on this topic above.
I did reset all except one, guess what, I forgot to set it back to RAW so Ive taken 133 shots all in jpeg.
I think ive now learned a lesson, but it hurts.
Im now going to be the child I could of been and walk around with a pet lip for the rest of the day.
Oh yeah! I’ve forgotten to reset my iso, both on my film cameras and my digitals, after shooting higher iso than my standard. Several times. Kicked myself black and blue (figuratively speaking) every time!
Ah yeah, that’s another one that can get you. I generally don’t ever deviate from RAW, but if you switch back and forth I could see it being frustrating at some point.
Great advice and reminder. I really need to implement this, I have ruined plenty of those one of a kind, quick first shots because I hadn’t reset my cameras settings.
Number 9 really rang a bell with me, I did exactly that one time, and WAS scratching my head as to what was wrong with my pics. I was this close to calling Nikon and demanding what was wrong with my camera, when this tiny thought wiggled into my brain, just a hint, a small sigh, and when I checked…yep…bracketing was on. Love this list and plan to use it every time!!!
You’re not the first to make that mistake… interestingly enough, I found that since I’ve started doing more HDR I’m much more conscious of the AEB functions than I used to be when its use was a rarity.
I have to say I have made these mistakes many times in 40 years and like a bad doggie, I still slip once in a while. I slip when I FORGET to stop and reset at the end of the day(if the session is completed). Exposure Compensation is the one that I seem to forget. Even though I can fix it in post, it is the one thing I hate to have to go back and fix because of a mental lapse.
It’s tricky, because (at least for me) mentally I think “oh yeah, I’ll be sure to reset that” and at the end of the day I reset some of the things but not others. Live and learn…
Its great to be reminded about resetting our camera’s.
Ive been out seven hours today, frost late morning with mist, sunny afternoon then I waited for sunset, the light changes ever so quickly and I cant remember how many times I changed the settings but it must of been alot.
My fingers were really cold at the end of the day so I adjusted everthing upon my return home after warming up
Thanks for the topic, its a great thing for us all to remember.